W256
38mm counter leg with W198 adjustable foot providing up to 30mm height adjustment. 100mm square top plate. Height 150mm or 250mm when closed or other heights made to order. Chrome. Satin Chrome.
38mm counter leg with W198 adjustable foot providing up to 30mm height adjustment. 100mm square top plate. Height 150mm or 250mm when closed or other heights made to order. Chrome. Satin Chrome.
Counter leg with adjustable foot. 25mm or 32mm diameter with W58 type pivoting adjustable foot providing up to 13mm height adjustment. 75mm square top plate. Up to 250mm high when closed or other heights made to order. Chrome. Satin Chrome.
Adjustable foot for 25mm square 16g tube with steel adjuster and black plastic base and insert Foot pivots 25? from vertical. Provides up to 13mm height adjustment.
Nylon pad adjustable foot 51mm diameter base, 32mm diameter top plate, 12mm diameter stem. Provides up to 30mm height adjustment. Chrome. Satin Chrome.
Spacer rings used to project the lock forwards where there is an unusually large gap between the sliding glass door panels. Widths can be specified 3mm, 6mm or 9mm. Chrome. Satin Chrome.
Double bottom track incorporates nylon rollers on which the glass panels run. Supplied drilled and countersunk for fixing. Polished aluminium. Anodised in gold, silver or bronze or black powder coated.
Double top track/side channels can be used either to guide the top of sliding glass doors or for a sliding glass door to locate into at the side of an opening. Supplied drilled and countersunk for fixing. Polished aluminium. Anodised in gold, silver or bronze or black powder coated.
***DISCONTINUED***
Double aluminium track with rigid pvc insert in the bottom section on which the polished edge glass slides. For 6mm glass. Also available as single track W21. Polished aluminium. Anodised in gold, silver or bronze or black powder coated.
Light pattern aluminium double track with rigid pvc insert in the bottom section on which the polished edge glass slides. For 6mm glass. NB as the gap between the glass panels is only 1.5mm this section is not suitable for use withs lock or finger pulls. Polished aluminium. Anodised in gold, silver or bronze or black powder coated.
Plunger lock fits into 25mm diameter hole drilled in front glass. For 6mm glass only. Should be fitted close to top or bottom of the door. With spring loaded shoot. One key per lock, additional keys (W617K) can be ordered. Supplied all to pass only. Chrome. Satin Chrome.