Corner elbow 90deg or 135deg in 25mm, 32mm, 38mm, 51mm, 63mm or 76mm tube supplied with liner joints. Polished Brass. Chrome. Satin Chrome. Stainless Steel.

Side mounting balustrade post for blind fixing. Post up to 1.5m high, 51mm diameter, capped off at the bottom. With two 38mm diameter mounts for fixing from front side into blind holes in the stair string giving 25mm internal projection from string. Requires panel clips and handrail fittings. Post normally suitable for applications requiring 1.5Kn concentrated load on the handrail dependent upon specific site requirements and fixings. Polished Brass. Chrome. Satin Chrome. Stainless Steel.

Side mounting balustrade post with concealed fixing. Post up to 1.5m high, 51mm diameter, capped off at the bottom. With two 38mm diameter mounts for fixing through stair string from reverse side giving 25mm internal projections from string. Requires panel clips and handrail fittings. Post normally suitable for applications requiring up to a 1.5Kn concentrated load on the handrail dependent upon specific site requirements and fixings. Polished Brass. Chrome. Satin Chrome. Stainless Steel.

Base coverplate. 155mm diameter coverplate to conceal base fixings. Polished Brass. Chrome. Satin Chrome. Stainless Steel.

Adjustable elbow allows special angles from 90° to 180° to be created on site. Also suitable to create a change of plane up to 25mm. For 38mm or 51mm diameter tube. Polished Brass. Chrome. Satin Chrome.

Core post 700mm or 900mm high overall for 51mm tube strong steel tube with welded base plate enables system balustrade to be assembled to meet the requirements of BS6180 or section K of the building regulations for most locations. Requires coverplate W809.

System joint with mitred and welded top saddle to form 90° corners. Also available as W737 at any angle to customers requirements. For 38mm or 51mm diameter tube with mitred corners (W650). Polished Brass. Chrome. Satin Chrome.

Pivoting through ring. Adjustable slide over ring allows handrails or cross rails to be fitted to an upright at any angle. Adjust through 90°. For 38mm or 51mm diameter tube. Suitable for use with W740 adjustable elbow. Polished Brass. Chome. Satin Chrome.

Pivoting system joint. Pivoting saddle allows two 38mm or 51mm diameter tubes to be fitted together at any angle. Adjusts through 90°. Polished Brass. Chrome. Satin Chrome.

Drop end. Customer to specify angle when ordering. Requires W616 end cap. Polished Brass. Chrome. Satin Chrome. Stainless Steel.