Large hinges for 6mm or 10mm glass to cabinet fitting. Two sections 75mm x 65mm locate over door, are connected with fixing through 14mm hole drilled in door and hinge against a panel screwed to side of opening. Supplied in pairs. Polished Brass. Chrome. Satin Chrome
Large hinges for 6mm or 10mm glass to glass fitting. Two sections 75mm x 65mm locate over door, are connected with fixing through 14mm hole drilled in door and hinge against sections similarly fixed to side panels. Supplied in pairs. Polished Brass. Chrome. Satin Chrome.
Hinges for 6mm glass to cabinet fitting. Two sections 38mm x 22mm locate over glass door, are connected with fixing through 10mm hole drilled in door and hinge against a panel screwed to side of opening. Supplied in pairs. Polished Brass. Chrome. Satin Chrome.
Hinges for 6mm glass to glass fitting. Two sections 38mm x 22mm clamp over glass door and hinge against glass side panels. Glass door and panel must be drilled with 10mm hole. Supplied in pairs. Polished Brass. Chrome. Satin Chrome.
Hinge section for 6mm or 10mm glass doors. Hinge sections are fitted to top and bottom of glass doors with hinge pins located into barrels recessed into top and bottom of opening. Glass should be bonded into hinge sections. Supplied in pairs for one door up to 500mm long. Where locking is required use W941/W942 featured on page 8. For 6mm glass cutting deduct 40mm from the height of the opening and 8mm from the width of the opening. For 10mm glass cutting deduct 70mm from the height of the opening and 8mm from the width of the opening. Anodised.
