Results

Introduction to System Nylonslide 6mm

Suitable for 6mm glass up to 1.5m high this system is available in polished aluminium, silver anodised or powder coated. Can be supplied in cut lengths up to 4m or in 2m or 4m stock lengths.

Glass Panels slide on nylon rollers which are incorporated into the bottom track while the top of the glass is supported in the top track. This system is suitable for use in display cabinets, showcases or serving hatches.

The usual overlap allowed between two glass doors is 26mm. For glass sizes deduct 22mm from the height of the opening.

For safety reasons we recommend all glass should have polished edges. Please check with your glass merchant to ensure that the specification of the glass is suitable for the particular installation.

For side channels or draught excluders deduct 38mm from the height of the opening. The maximum recommended height to width ratio per door is 1.5:1.

Introduction to System Nylonslide 10mm

Suitable for glass up to 1.5m high this system is available in polished aluminium, silver anodised or powder coated. Can be supplied in cut lengths up to 4m or in 2m or 4m stock lengths. Glass panels slide on nylon rollers which are incorporated into the bottom track while the top of the glass is supported in the top track. This system is suitable for use in display cabinets, showcases or serving hatches where 10mm glass is required.

The usual overlap allowed between two glass doors is 26mm. For glass sizes deduct 24mm from the height of the opening. For safety reasons we recommend all glass should have polished edges. Please check with your glass merchant to ensure that the specification of the glass is suitable for the particular installation.

For side channels or draught excluders deduct 40mm from the height of the opening. The maximum recommended height to width ratio per door is 1.5:1.

Introduction to System Heavislide

Suitable for 10mm glass up to 2.5m high this system is available in polished aluminium, silver anodised or powder coated. Can be supplied in cut lengths up to 4m or in 2m or 4m stock lengths.Glass panels are located with bedding strip into a runner section that incorporates steel ball bearing wheels. These wheels run along a neat bottom track while the top of the glass is supported in the top track. This system is suitable for use in display cabinets, showcases or serving hatches where 10mm glass or taller doors are required.

The usual overlap allowed between the two glass doors is 26mm. For glass cutting sizes deduct 45mm from the height of the opening. For safety reasons we recommend all glass should have polished edges. Please check with your glass merchant to ensure the specification of the glass is suitable for the particular installation.

To calculate the length of side channels or draught excluders deduct 76mm from the height of the opening. The maximum recommended height to width ratio of each door is 2:1.

Introduction to Cantel Vogue 9000

VOGUE is based on two different wall sections but can be combined or used with any other CANTEL range and accessories. Generally available in a chrome plated finish or powder coated white.

Non standard powder coated finishes may be subject to a minimum order quantity or setup surcharge dependent on colour.

Introduction to Cantel Focus 8000

The FOCUS system allows storage and display for any need. The cladded units provide a high quality, easily assembled scheme for retail interiors. The system is flexible and can be combined with any other CANTEL system or SAVEKERS product. FOCUS can be supplied in any of the standard finishes or adapted to customers specific needs. Accessories can be added to the units and system easily maximising the possibilities.

Units can also be ordered with three uprights. Please contact us for more details.

Non standard powder coated finishes may be subject to a minimum order quantity or set-up surcharge dependent on colour. Most colours are readily available.

Introduction to Cantel Ikon 7000

The IKON range allows flexible shelving, storage and display solutions for a variety of retail needs.

IKON is available as a powder coated dark granite or silver colour as standard with a choice of wood finishes.

Non standard powder coated finishes may be subject to a minimum order quantity or setup surcharge dependent on colour.

Introduction to System Freeslide

Suitable for 6mm glass up to 1.5m high this system is available in polished aluminium, silver anodised or powder coated. Can be supplied in cut lengths up to 4m or in 2m or 4m stock lengths. Glass panels are located with bedding strip into a runner section that incorporates either nylon or steel ball bearing wheels. These wheels run along a neat bottom track while the top of the glass is supported in the top track. This system is suitable for use in display cabinets, showcases or service hatches.

The usual overlap allowed between two glass doors is 26mm. For glass cutting sizes deduct 27mm from the height of the opening. For safety reasons we recommend all glass should have polished edges. Please check with your glass merchant to ensure that the specification of the glass is suitable for the particular installation.

To calculate the length of side channels or draught excluders deduct 47mm from the opening height. The maximum recommended height to width ratio of each door is 2:1.

W1166

Hanger or backstay for W249 25mm, 32mm, 38mm, or 51mm tube. With 25mm x 115mm fixing plate. Chrome. Satin Chrome. Electro Plated Brass. Powder Coated Bronze.

Can't find exactly what you are looking for? That is OK, because if you send us a drawing we will be able to make it for you.
Find out more